Polyaluminum chloride in aluminum oxide content of more than 30% is the level of drinking water, and the basicity of 55% to 90%
But to be slow, otherwise it will float the sediment, with a long rod on the shore to promote pipe suction, connecting a pipe, we are using that kind of water v
PAM10-30kg. If the process for the first biochemical, then the above dosing doubled. The actual dosage according to the water quality is different, under normal
HG / T 4536-2013 Date of Implementation: 2014-03-01 Chinese name: Polymeric chloride for cosmetics English name: Poly aluminum chloride for cosmetic use
Water conservancy conditions, inputs and so on. In addition, the amount of input also has a direct impact on the treatment effect, will also affect the treatmen
Both do not respond to the use of aluminum chloride solution to eliminate the hazards of cadmium elements is the use of the hydrolysis of aluminum chloride and
Industrial wastewater polyaluminum chloride in aluminum oxide content here is greater than or equal to 27%
It is one of the most difficult industrial wastewater to deal with. It is good to add polyaluminum chloride. Large alkaline wastewater has large amount of water
Mercury and other heavy metal ions, the chemical formula is [AL2 (OH) NCL6-NLm] where m represents the degree of polymerization, can effectively remove the wate
5) In addition to the performance of the paper rupture long, the other indicators are improved to varying degrees, the pressure spray-dried products have unique
Suction pump! Because sewage treatment companies generally use liquid polyaluminum chloride, but also know how much of the remaining pharmaceutical, manufacture
Which can effectively remove the aluminum ions in the source water and residual free aluminum ions in the water after coagulation of the aluminum salt
Can shorten the residence time of sewage in the process, improve the handling capacity of the sewage system. 2, PSAF PSAF removal of algae was significantly bet
Easily soluble in water, hygroscopicity, industrial water, a variety of industrial waste water, 10% (mass) of the aqueous solution of reddish brown transparent
Dilute the water to the desired concentration and add coagulation. Water plants can also be dubbed 2-5% direct dosing, static to a red-brown liquid. In fact, to
Polyaluminum chloride solution containing aluminum content equivalent to the percentage of alumina mass fraction of the solution
Can be used, but this process will certainly not be achieved alone. Now conventional with other pharmaceutical processes, can be completely up to standard. Lear
Content of the root color of the relationship, the general wisdom Poly aluminum chloride more than 28%, the color is light yellow, 28% of the yellow slightly he
Aluminum salt coagulant, which can replace the traditional iron, has been proved by a large number of applications that the use of polyaluminium chloride to tre
Colloidal particles in water can be trapped when these precipitates in the formation of metal salts (such as aluminum sulfate or ferric chloride) or metal oxide
Generally 100 degrees -200 degrees can be - Gongyi City, Henan Yu-yuan water purification materials Co., Ltd.
And then find the best dosage. In the experiment, but also according to the actual situation of the site to vote, said polyaluminum chloride solid 3g, into a cl
The global pattern is that all websites are accessed through proxies, including those that can be directly connected. The PAC mode is to go some of the sites to
35 tons .2 tons, bauxite 0, hydrochloric acid 1 main raw material, 0.5 tons of calcium aluminate powder, as well as thermal costs, the cost can be calculated on
Go to the chemical shop and then buy some hydrochloric acid and then put the aluminum block until the aluminum block and then there is no gas out of the solutio