Gongyi Filter Industry Co., Ltd.

pac10% concentration refers to the effective aluminum it

home > Questions

2017-12-07 13:36:40

Generally speaking, there are two ways to add PAC: dry cast and wet cast; if it is dry cast, then add 0 for each ton of waste water. Then your 10% mean 10KG PAC per 100KG of wastewater , But in practice this is not possible.Practical experience, PAC dry powder dosage per ton of sewage plus 0.5KGPAC. In addition .5KGPAC dry powder amount to calculate the pump flow ok. So I think you say 10% Refers to the configuration of 10% PAC concentration is the first PAC dry powder dubbed 10% solution, and then the solution was added to the reaction tank. Then there is a dosing pump flow is critical