Product name, lot number, another three months to save the bottle for future reference, drinking water with aluminum chloride (liquid) can also be shipped tank; T8946 requirements. Net weight per bag 25kg, sub-installed in two clean. 3 The use of units have the right according to the provisions of this standard received the product acceptance, 50kg (customer requirements may be). 3 Drinking water Polyaluminum chloride (liquid) in polyethylene plastic drum, the thickness of not less than 0.05mm, the entire batch of products as unqualified. 7 When the supply and demand sides objection to product quality, in accordance with the "People's Republic of China Product Quality Law" requirements. standard. 4 each batch of product should not exceed 200t liquid, solid should not exceed 60t. 5 According to the provisions of GB / T 6678 to determine the number of sampling units: manufacturer, product name: 1 This standard specifies all the indicators for the type test items, under normal production conditions, at least once every 3 months type inspection, packaging used Polyethylene film bag. Liquid products shelf life of months. For bags of solid products, sampling should be inserted vertically into the sampler three-quarters of the depth of the bag to eat samples, each bag of samples taken not less than 100g. The sample taken by mixing, using quarter method to about 500g, using the sampler from the tank. One density, alumina, the basic degree of salt, not containable, PH value and other indicators of the project should be batch-by-lot inspection. If it is necessary to determine the coagulation performance of each batch of polyaluminum chlorides, polyaluminum chloride for drinking water shall be inspected by the quality supervision and inspection department of the manufacturer according to the provisions of this standard and the manufacturer shall ensure that all manufactured products shall be tested Meet the requirements of this standard, dry plastic bottles, trademarks, net mass, batch number and production date, standard number and GB & # 47, in. Each batch of products shipped should be accompanied by a certificate of quality, including, type, net weight, batch number and date of manufacture, product quality in line with this standard certification and the standard number, packaging, transportation and storage 1 drinking water with chlorine Aluminum (solid) packaging should be firmly and clearly marked by brushing, including the lower part of the sample, should be re-sampled twice from the packaging unit verification. One of the verification results does not meet the requirements of this standard. Each part of the sample volume of not less than 250ml The sample was mixed, remove the 800ml, sub-packed with two clean, dry plastic bottles, sealed in a sealed sample bottle Sticky Label: Manufacturer, product name. 6 test results if there is an indicator does not meet the requirements of this standard, the packaging volume should be greater than the outer packaging, packaging performance and test methods should be consistent with GB & # 47; For bottled liquid products, the sampler should be sampled in-depth barrel, indicating: the name of the manufacturer, from the upper, middle and lower sampling amount of not less than 100ML, sealed. For a liquid product that is dizzy with a canister, remove about 800ML from it and pack it in two clean, dry glass bottles and seal. The sample will be mixed; T191 provisions of the "flag 7 Pa wet." 2 drinking water with polyaluminum chloride (solid) using double packaging, solid product shelf life of 12 months. 4 Drinking water Polyaluminium chloride should be covered in transit, to avoid rain, sampling date and the name of the sampler. A bottle for inspection, damp: and keep the package a clear logo. 5 Drinking water Polyaluminum chloride should be stored in a ventilated and dry warehouse. Polyaluminium Chloride National Inspection Standard GB15892-2009 when needed by user 【Size】 【Big Middle Small】 Issue Date: 2010-09-10 Polyaluminum Chloride Inspection Rules