Polyferric sulfate is a kind of inorganic polymer coagulant, which is mostly used for purification of drinking water, industrial water, industrial wastewater an
Polyaluminum chloride on the market will generally have 20%, 22%, 24%, 26%, 28%, 30% and other products based on the content of the active ingredient alumina. T
Most chemical products are likely to degrade and fail, which will affect the performance of products, reduce the value of products, and increase the cost of use
Removal of alkalinity of printing and dyeing alkaline wastewater by polyacrylamide: anionic polyacrylamide can be used to treat alkaline wastewater, and the pH
Paper mills need a lot of water in the production process to produce good paper, but also produce a certain amount of sewage. Polyacrylamide (PAM) is widely use
The shelf life of different kinds of polyacrylamide is very different, which is related to its structure. Relatively speaking, the shelf life of anionic polyacr
When centrifuges are used in sewage desliming field, we select the type through polyacrylamide pilot test and pilot test. The floc strength, the quality of supe
Polyacrylamide aqueous solution should be used and prepared on the spot. When the solution is placed for a long time, its performance will gradually decrease de
Although the dyeing and weaving industry has created a variety of colorful products, it has caused serious pollution of the water environment. The colority of t
High purity polyacrylamide is mainly used in the following aspects: 1.Sludge treatment: generally, cationic polyacrylamide is used for sludge dewatering. Sludg
In order to improve the relative molecular weight of polyacrylamide, we should avoid the adverse factors that affect the solubility of polyacrylamide and ensure
The relationship between human and chemical industry is very close in the past and present, and it has been widely used in all aspects of life. In modern life,
People depend on food, but do you know how polyacrylamide is used to treat wastewater in food factory? Food waste water mainly refers to the wastewater discharg
In the process of making tobacco flakes, more than 70 tons of wastewater is usually discharged per ton of products, and the composition of the wastewater is com
The daily laundry volume of the laundry industry is large, and the wastewater discharge is large. There are a lot of eutrophic substances in laundry wastewater.
In aluminum plate production, acid wastewater comes from acid etching process, neutralization and oxidation process in oxidation workshop, and degreasing and p
Polyaluminum chloride (PAC), aluminum chloride and basic aluminum chloride are basically similar substances. PAC without crystal water is called polyaluminum ch
There is a large amount of stagnant water in the swimming pool. Because of the exposure to the external environment, the pool water is vulnerable to the environ
Polyacrylamide flocculant has a positive group in its molecule, which is widely used in mining, coal preparation, asbestos products, petrochemical industry, pap
Construction mud is a semi colloidal suspension of fine clay particles, which is dispersed in water and mixed with water. Construction mud can be divided into:
Both polyacrylamide and decolorizer use decolorizing effect. Many users mistakenly think that these two effects should be the same, but they are not. Polyacryla
In the face of a wide range of water treatment agents, which flocculant should be selected for leather wastewater treatment? Tannery is an industry that produc
As a kind of inorganic polymer coagulant, polyferric sulfate began to appear in 1980s with the enhancement of environmental protection awareness in China. It d
Oily wastewater mainly refers to the pollutants produced by petrochemical enterprises in the process of exploitation. If the oily sludge is not treated properly
Ferrous sulfate, containing 20.09% iron and 11.53% sulfur, is a blue-green crystal, commonly known as "green alum". Adding a small amount of ferrous sulfate in