Establish awareness of water conservation against wasting water, anionic polyacrylamide prices are not high, the treatment of industrial wastewater have special effects, for suspended particles, more out of high concentrations of particles with a positive charge, water PH value of neutral or alkaline Wastewater, iron and steel plant wastewater, metallurgical wastewater, coal washing wastewater, electroplating wastewater and other wastewater treatment works very well, such as the alcohol plant alcohol can also be used dehydration, pressure filtration for recovery, for river sedimentation and paper pulp dry strength effect Great. Anionic polyacrylamide is more and more popular in the water treatment industry. Anionic polyacrylamide is affordable and has low price. It has the advantages of burning odorless, non-toxic, good solubility and high viscosity , Toughness and other characteristics, product performance and stability, to avoid other plant powder and ordinary starch due to origin, time is different, the bonding quality is uneven, the production of the industry need to repeatedly debug the recipe, so as to avoid instability in the quality of the product phenomenon , Which is used for papermaking auxiliaries and assistive rate agents. Adding PAM-LB-3 anionic polyacrylamide into the pump slurry storage tank before papermaking can increase the online retention of fillers and fine fibers in water by 20-30%. =, Per ton can save 20-30kg of pulp.
Industrial and industrial waste can increase the concentration of organic and inorganic compounds in groundwater. Fertilizers and manure applied in agriculture can cause a wide range of nitrate concentrations in groundwater. Pesticides have less pollution to groundwater and are limited to shallow layer. Anionic polyacrylamide is a new type of sewage treatment packing on the market, especially for the treatment of industrial wastewater, pharmaceutical pesticide wastewater and garbage filtrate, flocculation of wastewater treatment, Adsorption, bridge, roll sweeping and other coagulation functions, without adding agents, can significantly remove the refractory pollutants in wastewater, improve the biodegradability of wastewater.
There is no doubt that ss is reduced. The so-called BOD refers to the amount of oxygen needed to decompose organic matter in water by aerobic microorganisms. It
Polymeric ferric sulfate is also one of inorganic flocculant products, PAC is generally used in combination with PAM or polyferric sulfate with PAM very good re
Poly aluminum chloride production of raw materials is bauxite, kaolin these things! Can be used to deal with copper mine sewage COD, BOD these things! Do not un
Call directly consult the manufacturer of the product or directly loaded with a hundred milliliters of measuring cylinder (compaction) said the quality of densi
Put the water before the PH value must be adjusted to 7.5-7.8, such as the rain is best not to pollination of aluminum chloride, because the rain will lead to w