Not for customers to reduce costs of the enterprise is not a good business, Henan Gongyi filter aluminum chloride mill manufacturers (+ 86-15639065815) not only reduce costs, but also for the sake of users, strict quality control in the production, flocculant at home and abroad The demand is increasing day by day. After a lot of application and practice, it is proved that the purchase price of PAC PAC is not high, which can obviously improve the purification efficiency of sewage treatment, improve the quality of effluent and have better water purification effect.
Poly Aluminum Ferric Chloride PAFC is a new composite inorganic polymer water purifying agent mainly composed of aluminum and iron. Iron is a high-valent iron and forms polynuclear complexes upon hydrolysis. The purified water product has the advantages of polymerization The characteristics and characteristics of aluminum chloride PAC and iron salt overcomes the difficulty of water purification of PAC when low temperature and low turbidity. At low temperature, it has the characteristic that the proportion of alum formed in water is large and the alum is formed tightly. Since aluminum salt In addition to color performance, greatly reduce the color of the water, the water purification effect allows users to be very satisfied.
Polyaluminum chloride should be strict quality control, regardless of price level, no matter what time, the quality is the yardstick for everything, in the following, introduce PACA PAFC use simple process steps: 123> will be mixed with room temperature water at a weight ratio of 1/3 side while stirring until completely dissolved, and then diluted with water to the desired concentration of raw water concentration of 100 ~ 500mg / dosage 3 ~ 6mg / I, specific Dosing, water quality should be based on the water test, select the appropriate dosage after the vote will get a multiplier effect.
However, the idea should belong to the suspended matter and more, the role of PAC is to flocculate the suspended solids in the water, remove the color effect is
Polyaluminium chloride, polyferric sulfate and so on are all inorganic flocculants. Polyacrylamide (PAM), DMC-AM copolymer, polydimethyldiallylammonium chloride
And the pH of the raw water, can achieve good flocculation effect, changes in organic matter, etc. Alumina content is a measure of the effective component of PA
PAC refers to the polymerization of aluminum chloride in the test process, PAC is easy to hydrolysis, into Al (OH) 3. Two Al (OH) 3 is not stable, heating becom
This speed and slurry flow can be adjusted to control the dryness of the PAC produced. The general speed is 15-20 seconds / circle