How to determine the parameters for the use of pH adjusting agent in swimming pool water treatment? How to determine the parameters for the use of pH adjusting agent in swimming pool water treatment? A swimming pool is currently undergoing water treatment, but due to the lack of handling experience on-site staff, the current situation is to refer to some information to deal with, but according to the filtered water to understand that the information on the coagulant dosage Can be used 3 ~ 5mg / l, pH adjusting agent used 1 ~ 5mg / l, but this swimming pool water treatment staff do not know this parameter refers to the dosing solution or need to dosing into the circulatory system, the amount of Is it still need to calculate the hourly dosage? How to calculate? Today's source water purifier will explain to those who do not know the information on these materials. In fact, the general swimming pool water treatment, the main pollutants are some suspended solids and some human into the bacteria, coagulant dosage 3-5mg / L, and PH regulator for the 1-5mg / L. And here is the reference dosage is dosing concentration, that is, 1L water dosing 3-5mg, that is, 1 cubic meter of water dosing 3-5g coagulant. As long as the pool to confirm the total number of cubic meters of water, according to the proportion of investment can be. As for the dosage of PH adjusting agent, the pH of the swimming pool water should be adjusted to about 7 neutral. No fixed dosage, according to pH test strips or pH meter real-time monitoring. This information is sourced from the exclusive source of filtered water purification, please indicate the source URL: http: //www.gyzhenyu.com/