home > News
2017-12-19 09:22:22
Polyaluminum chloride concentration is affected by what factors affect the concentration of polyaluminum chloride equipment which elements of the constraints. In recent years, the rapid development of China's polyaluminum chloride industry and its skill have now reached the international advanced level. The number of production companies has reached more than 300, but the production companies are small in scale with an annual output of 2000-5000 tons. The industrial development has obvious regional characteristics , Mainly distributed in Henan, Shandong, Jiangsu and Zhejiang and other regions. Nowadays, due to the increasing demand for product quality indicators in domestic and foreign markets, the materials used in China have gradually shifted to aluminum hydroxide. The sewage we process can not be static water temperature, ph value, the climate will have a direct impact on the use of the role, so before the use of polyaluminium chloride to do a small test is essential process. Polyaluminum chloride is a consumable for sewage or drinking water treatment, polyaluminum chloride manufacturers advocate the use of polyaluminum chloride, the best of each batch of goods before use to make a small test, especially in winter and summer, Temperature and humidity have a great impact on the concentration of PAC, even more reasonable before the experiment equipment. Polyaluminium chloride manufacturers PAC in use, we must first understand what you are dealing with water quality: for example, the treatment of industrial wastewater, drinking water is still. If it is industrial wastewater treatment, it is necessary to be subdivided into what plants produce sewage, sewage treatment technology is still flotation technology is the other, did not deal with poor water quality, as long as the full understanding of the water quality before the right remedy, in practice In the impact of the role of polyaluminum chloride is still a lot of elements: for example: water temperature, PH value, the nature of impurities in water and its content of polyaluminum chloride, water quality and so on. Different manufacturers produce PAC because of the quality is not the same, after you go back to the first batch of goods to do is: to do a small test, and then after a small trial calculated the best batch of polyaluminium chloride Add amount.
But there are impurities in industrial products, the determination of the impact of the basicity of the salt, the determination of the base of the salt can reac
Polyaluminum chloride liquid products to adapt to the PH value range of 5.0-9.0, the best PH value of 6.5-7.6, the product can be added directly or diluted 10 t
Need to cooperate with PAM. Therefore, only the PAC is definitely not work, polyaluminum chloride low molecular weight, can not be brought through the filter cl
This is because there are two different processes for the production of polyaluminum chloride. If the effect is similar, it means that the production process ma
And the pH of the raw water, can achieve good flocculation effect, changes in organic matter, etc. Alumina content is a measure of the effective component of PA