How to determine the concentration and dosage of polyaluminum chloride in sewage treatment Polyaluminum chloride is used in sewage treatment, which is mainly solid matter of yellow or yellowish brown powder. The water treatment has the function of flocculation and is suitable for printing and dyeing plants, papermaking Factories, tanneries Food Factory and other industries water treatment, but also has the role of phosphorus removal, phosphate and wastewater sedimentation can be used for domestic sewage plant phosphorus removal. Pollution treatment using polyaluminium chloride are generally used as a flocculant, used for individual phosphorus removal agent. Because of the different functions, the concentration of the product allocation and dosage are very different, under normal circumstances how should we determine the concentration and amount of PAC? Stirring should be used in what way? Solid aluminum chloride content of 28% of the national standard, the liquid content of 10%. The solid should be dissolved before using the solid concentration of 10% (dissolved gas mixing or mechanical stirring can be used), the dosage can be based on untreated turbidity of raw water to determine the best dosage, the general water turbidity in the 100-500mg / l, every 10 tons of water dosage 10-20kg, according to the specific test to determine. The use of polyaluminium chloride for municipal wastewater or industrial wastewater, the corresponding dosage and dosage are different, in order to be accurate and improve the efficiency of treatment, it is best to try to ensure that the amount of small and on-site testing and effect.