home > News
2017-12-13 14:43:16
Filter solid aluminum chloride and liquid polyaluminum chloride to provide the use of cost analysis table filter solid aluminum polyaluminate and liquid polyaluminum chloride to provide the use of cost analysis table polyaluminum chloride content is a measure of the active ingredient in the product with the polymerization of chlorine Aluminum prices, the relative density of PAC and the solution in general have a certain relationship, the more the relative density, the higher the content of PAC. Polyaluminum Chloride Viscosity Poly (aluminum chloride) and polyaluminum chloride (PAC) contents increase the viscosity. Polyaluminum chloride Under the same conditions, the use of polyaluminum chloride under the same conditions, polyaluminium chloride concentration is very good, its viscosity is lower than aluminum sulfate, more conducive to the implementation and use. The distinction between solid and liquid polyaluminum chlorides is that liquid polyaluminum chloride is not dry and has the advantage of being non-dilutable, easy to load and unload, and relatively inexpensive. The disadvantage is that transportation requires a tanker truck and the transportation cost per unit increases 2-3 tons of liquid) solid PAC after drying form, easy to transport advantages, do not need tanker, the disadvantage is the use of diluted also need to increase the intensity of work. Polyaluminum Chloride Note: Polyaluminum chloride is an inorganic polymer coagulant, due to the bridging effect of hydroxide ions and polymerization of polyvalent anions produced higher molecular weight, higher charge inorganic Polymer water treatment agents. Widely used in industrial water purification, industrial wastewater and urban sewage treatment. Polyaluminum chloride product performance: water costs 20-80% lower than other inorganic coagulants; rapid formation of flocs, and alum large, fast settling speed; adapt to a variety of temperature water sources, good solubility; liquid products To adapt to automation investment, corrosive small, easy to operate, and long-term use of non-stop tube. This information is provided by http://www.gyzhenyu.com. If reprint, please indicate the future!
Content of the root color of the relationship, the general wisdom Poly aluminum chloride more than 28%, the color is light yellow, 28% of the yellow slightly he
The data suggest pac optimum ph is 8, the need for hydroxide In general, aluminum and iron salts in alkaline environment effect, because they are to hydrolysis
The formation of flocs fast, rapid settling velocity, than aluminum sulfate and other traditional products processing capacity, so as to achieve the purpose of
Aluminum salt coagulant, which can replace the traditional iron, has been proved by a large number of applications that the use of polyaluminium chloride to tre
Can be used, but this process will certainly not be achieved alone. Now conventional with other pharmaceutical processes, can be completely up to standard. Lear