Summary winter accelerated Poly aluminum chloride dilution What are the methods? Summary winter accelerated poly aluminum chloride dilution What are the methods? At present, polyaluminum chloride is widely used in the field of water treatment, and we have encountered many problems in the application process in recent years. Take the good years last year, due to the temperature drop this winter, resulting in extremely cold weather, but also makes the water temperature dropped to 3 to 4 degrees, which for the winter using polyaluminium chloride to deal with water quality have an impact, due to environmental temperature problems , Making the solid polyaluminum chloride used in the process of dissolving too slow, thus affecting the quality of the water treatment. For this reason, the polyaluminum chloride dissolves in the process of winter water treatment has become the focus of people's problems. So, in winter to speed up the polyaluminum chloride dilution and dissolution methods are what? In response to the above problems, it is now commonly used to dilute solid aluminum polyaluminate products into liquid products. Apart from this, there is also manpower warming given to the water quality and the environment. However, this operation cost is too high and resources are wasted. Therefore, it is practiced very little among small and medium sized water stations and enterprises. Now, polyaluminum chloride is applied to water treatment in winter, and it is often mixed and dissolved in solid: water = 1: 5 (W / V) when the preparation is used, and diluted with water to the above concentration, but in order to ensure Use the effect, the best diluted in 4 to 8 hours after use. Today, as the use of liquid polyaluminum chlorides continues to improve, and with the advantages of product performance, the market has gradually opened up. This information is a source of filtered water purification original, for reprint please specify the way address: http://www.gyzhenyu.com