home > News
2017-12-13 14:42:08
Magnetized sewage can reduce the amount of polyaluminum chloride Magnetic field can affect the properties of many substances, which is the focus of scientists have been studying and difficulties. That in the water purification industry, magnetization in the end can not produce the effect of it, it will polyaluminium chloride and other water purification agents have any effect on this area, we have done a series of experiments. The result, let us wait and see. 1. Under a given magnetic field, the turbidity of water samples with and without magnetization shows a trend of first decreasing and then increasing with the increase of magnetization time. 2. Magnetization Dissolved PAC aqueous solution of turbidity with the increase of magnetization time and gradually decreased from the coagulation solution of coagulated coagulant solution and coagulation coagulation coagulation effect, the magnetic field to have a certain The positive impact is conducive to the formation of coagulation and sedimentation. 3. To a certain amount of magnetized water and non-magnetized water, polyaluminum chloride, when the amount of investment in polyaluminum chloride smaller when the magnetized water and non-magnetized water turbidity increased with the dose Lower. However, the magnetization water finally found that the water turbidity was lower than the non-magnetized water. After magnetization, water quality can be improved, and to some extent can reduce the dosage of polyaluminum chloride.
0 Al 2 O 3 0 28.0 27.0 29.0 Solid Polyaluminium Chloride GB 15892-2003 Aluminum Oxide (AL2O3) ≥% 30 Solid Polyaluminum Chloride GB 15892-1995 Alumina (AI2O3) c
I. Mainly through the compression of double, adsorption and electricity, adsorption bridge. Mainly through the action of compressing double layer, adsorbing neu
PAM10-30kg. If the process for the first biochemical, then the above dosing doubled. The actual dosage according to the water quality is different, under normal
: Polyaluminum chloride is a water purification material, inorganic polymer coagulant, also referred to as poly aluminum, abbreviated PAC, due to the hydroxide
The factory production of PAC Ferrite is a solid product, the color is brown, the chemical formula is [Al (OH) NCl6-NLm] where m represents the degree of polyme