home > News
2017-12-13 14:41:26
Polyaluminum chloride in the water treatment process over the General Assembly will not affect the water quality Polyaluminum chloride coagulant Hydrolyzate compressed colloidal particle diffusion layer to achieve colloidal detachment and mutual coalescence, or through the polymer coagulation Agent adsorption bridging role, the colloidal adsorption bonding, and eventually precipitate removed. Traditional coagulation and sedimentation processes have different degrees of removal of organic matter, the relative molecular weight of these organic compounds are usually more than 10,000. Polyaluminum chloride reinforced coagulation technology role By strengthening coagulation removal of natural organic matter in water has been a lot of research. Mechanisms of coagulation to remove organic matter mainly include the electric neutralization of colloidal natural organic compounds and the co-sinking effect between adsorption and metal hydroxide surface. Colloidal natural organic matter mainly depends on the coagulation of compressed double-layer, electricity and adsorption bridge or coagulant precipitation network shop. Strengthen coagulation removal of natural organic matter, the removal rate of the size of the coagulant by the type and nature of coagulant dosage and PH value and other factors. Strengthen the coagulation and sedimentation is to improve the coagulation conditions, so that the removal and removal of organic matter to further expand and improve the method mainly by adjusting the PH value, improve the coagulant, improve water conditions, adding oxidants, coagulants and other aids To achieve, by strengthening the coagulation precipitation, organic compounds can be removed from the relative molecular mass range from more than 10,000 increased to 3000 or even lower. Effect of coagulant types: Aluminum salt and iron salt coagulants can cause electrocatalytic neutralization to destabilize colloids to form humic acid and fulvic acid aluminum, iron polymers to facilitate the removal of precipitates, The surface of the oxyhydroxide provides strong adsorption. In addition, the formation of aluminum and ferroxide flocs can also capture some colloidal particles and dissolved organic matter, as well as the formation of humic acid and fulvic acid-containing polymers. Therefore, iron salts , Aluminum coagulant total organic carbon removal effect than the good coagulant organic coagulant dosing dosage: the greater coagulant dosage, total organic carbon removal rate is higher, the appropriate mix The dosage of coagulant should be determined according to the characteristics of water quality and the treated water quality requirements. PH value is affected: at the same dosage of ferric chloride, lower PH value will achieve high total organic carbon removal rate. Therefore, reducing the pH value for improving the total organic carbon removal rate is obvious. Polyaluminum chloride requires PH value between 8-9, the best coagulation point of fine aluminum sulfate PH value between 5-6.
GB: Nitric acid will sample desorbed xylenol orange and metal ions complex formed complex ion colors are red purple. And Al3 + at pH 5 ~ 6 on the xylenol orange
Polyaluminium chloride, polyferric sulfate and so on are all inorganic flocculants. Polyacrylamide (PAM), DMC-AM copolymer, polydimethyldiallylammonium chloride
The solubility of aluminum is related to the pH value, while the reduction of the amount of green chlorine dioxide will lead to excessive acidity and increase t
How do you add? Poly aluminum is a solid liquid? If you add the correct method, not a floc, continue to adjust ph to 8 or more, try again, if not yet floc, simp
Can not find ah But just to say that the viscosity of the various models is not the same There are several types of base oil synthetic polyaluminum chloride vis