There are two types of polyferric sulfate in the market, solid and liquid, but because solid polyferric sulfate is more convenient for transportation and storage, in most cases, solid polyferric sulfate needs to be prepared as an aqueous solution before use.

So what are the precautions for polyferric sulfate when it is configured into an aqueous solution? Like most water purification agents, tap water can be added directly to dissolve polyferric sulfate. Most of the time, the ratio of polyferric sulfate solid and tap water is configured at 1:3, that is, the solution concentration is configured to be about 30%. In the actual dosing, it is used after dilution according to the usage. In terms of dilution of the solution of polymeric ferric sulfate, it is necessary to dilute the solution evenly to prevent the difference in the subsequent use effect due to the difference in concentration.

Before using the polyferric sulfate, according to the different treatment water, through corresponding experiments to determine the appropriate dosage, not only can achieve a better water purification effect, but also can save costs. Because polyferric sulfate will produce excess sludge when it is added in a large amount, which is not conducive to the subsequent processing steps, but a small dosage will also cause a poor water purification effect. In general, when treating industrial wastewater, about 1 thousand tons of wastewater needs to use about 50 kg of polyferric sulfate according to the concentration of the treated wastewater.

Lvyuan Environment Group Co.,Limited specializes in the production and sales of solid polyferric sulfate and liquid polyferric sulfate, and has perfect after-sales service, which can provide you with actual polyferric sulfate dosing programs to ensure the effect of water purification.